Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of New Hampshire

Graffiti Removal for Concrete in New Hampshire

Pressure wash with a surface cleaner for concrete. Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface. Typical cost $200-$800.

The secret to graffiti removal for concrete is using the right method, not the most pressure. In New Hampshire, we match the cleaner and pressure to the surface so it comes out clean without damage. On concrete, the method we use is pressure wash with a surface cleaner.

Method and pressure

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

Cleaning concrete safely

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Signs you need graffiti removal for concrete

  • Spray paint or marker on walls, fences or signs
  • Ghost marks left from earlier removal

Where the grime comes from

  • Vandalism
  • Shadowing left by paint that soaked into porous masonry

Safe steps for homeowners

  • Photograph it for your records or police report first
  • Don't paint over it with a color that won't match
  • Ask about anti-graffiti coatings for repeat targets

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Driving paint deeper into porous masonry
  • Damaging the surface with the wrong solvent
  • Leaving a 'clean' patch that stands out

How we handle graffiti removal for concrete

  1. Identify the paint and the surface
  2. Test a remover on a small area
  3. Apply remover and let it dwell
  4. Rinse with pressure suited to the surface
  5. Treat shadowing or apply a protective coating

How much does graffiti removal for concrete cost?

$200-$800Typical range for a typical wall or tag area
1-3 hoursTypical time on site
As needed; fast removal discourages repeat taggingRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Serving New Hampshire and nearby towns

Commercial properties in New Hampshire usually get a big spring clean of sidewalks, entrances and parking areas to remove sand, salt and winter litter, and many schedule a second visit in the fall.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

We cover 110 cities and towns across New Hampshire. Find graffiti removal for concrete in your city:

Graffiti Removal for Concrete: frequently asked questions

How much does graffiti removal for concrete cost in New Hampshire?

Graffiti Removal for Concrete typically costs $200-$800 for a typical wall or tag area, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for graffiti removal for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is graffiti removal for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule graffiti removal for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in New Hampshire

Driveway Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Deck Cleaning for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$600

Efflorescence Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$600

Driveway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

Efflorescence Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$600

House Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$700

Sidewalk & Walkway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$250

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Patio Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Paver Cleaning & Sealing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $600-$1,800

Ready for a cleaner home or business?

Get a free pressure washing quote in New Hampshire. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote